Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA401 Materials engineering and construction"
Number of items at this level: 79. A
Akbari, Saeed,
Sakhaei, Amir Hosein,
Kowsari, Kavin,
Yang, Bill,
Serjouei, Ahmad,
Yuanfang, Zhang,
Ge, Qi
(2018)
Enhanced multimaterial 4D printing with active hinges.
Smart Materials and Structures,
27
(6).
Article Number 65027.
ISSN 0964-1726.
(doi:10.1088/1361-665X/aabe63)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:78412)
|
|
Animah, I. and Shafiee, M.
(2018)
A Framework for Assessment of Technological Readiness Level (TRL) and Commercial Readiness Index (CRI) of Asset End-of-Life Strategies.
In: Haugen, Stein and Barros, Anne and Gulijk, Coen van and Kongsvik, Trond and Vinnem, Jan Erik, eds.
Safety and Reliability – Safe Societies in a Changing World. Proceedings of ESREL 2018, June 17-21 2018, Trondheim, Norway.
CRC Press, London, pp. 1767-1773.
ISBN 978-0-8153-8682-7.
E-ISBN 978-1-351-17466-4.
(doi:10.1201/9781351174664)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:79970)
|
|
Appleby-Thomas, G.J.,
Hazell, P.J.,
Wilgeroth, J.M.,
Shepherd, C.J.,
Wood, D.C.,
Roberts, A.
(2011)
On the dynamic behaviour of three readily available soft tissue simulants.
Journal of Applied Physics,
109
(8).
084701.
ISSN 0021-8979.
(doi:10.1063/1.35736)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:45000)
|
|
B
Belsey, K.E.,
Parry, A.V.S.,
Rumens, C.V.,
Ziai, Mohamed A.,
Yeates, Stephen,
Batchelor, John C.,
Holder, Simon J.
(2016)
Switchable Passive Wireless Vapour Sensors from Inkjet Printed Electronic Components on Poly (dimethylsiloxane).
In:
Proceedings of the 2016 NIP & Digital Fabrication Conference.
.
pp. 323-324.
Society for Imaging Science and Technology
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:61762)
|
|
D
Datta, S.,
Mahfouf, M.,
Zhang, Qian,
Chattopadhyay, P.P.,
Sultana, N.
(2015)
Imprecise knowledge based design and development of titanium alloys for prosthetic applications.
Journal of the Mechanical Behavior of Biomedical Materials,
53
.
pp. 350-365.
ISSN 1751-6161.
(doi:10.1016/j.jmbbm.2015.08.039)
(KAR id:50514)
|
|
E
Economidou, Sophia N.,
Uddin, Md. Jasim,
Marques, M.J.,
Douroumis, Dennis,
Sow, Wan Ting,
Li, Huaqiong,
Reid, Andrew,
Windmill, James F. C.,
Podoleanu, Adrian G.H.
(2021)
A Novel 3D Printed Hollow Microneedle Microelectromechanical System for Controlled, Personalised Transdermal Drug Delivery.
Additive Manufacturing,
38
.
Article Number 101815.
ISSN 2214-8604.
(doi:10.1016/j.addma.2020.101815)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:85319)
|
|
Enjema, E.M and Shafiee, M. and Kolios, A.
(2018)
An Integrated Bayesian Network and Cost-Benefit Analysis Model for Blowout Preventer Configuration Selection in Deepwater Offshore Fields.
In: Haugen, Stein and Barros, Anne and Gulijk, Coen van and Kongsvik, Trond and Vinnem, Jan Erik, eds.
Safety and Reliability – Safe Societies in a Changing World. Proceedings of ESREL 2018, June 17-21 2018, Trondheim, Norway.
CRC Press, London, pp. 2007-2012.
ISBN 978-0-8153-8682-7.
E-ISBN 978-1-351-17466-4.
(doi:10.1201/9781351174664)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:79971)
|
|
Etebu, E. and Shafiee, M.
(2018)
Reliability Analysis of Structural Health Monitoring Systems.
In: Haugen, Stein and Barros, Anne and Gulijk, Coen van and Kongsvik, Trond and Vinnem, Jan Erik, eds.
Safety and Reliability – Safe Societies in a Changing World. Proceedings of ESREL 2018, June 17-21 2018, Trondheim, Norway.
CRC Press, London, pp. 2243-2247.
ISBN 978-0-8153-8682-7.
E-ISBN 978-1-351-17466-4.
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:79992)
|
|
G
Gaffour, Sid-ahmed,
Mahfouf, Mahdi,
Yang, Yong Y.,
Gama, Miguel,
Zhang, Qian
(2009)
Real-time implementation of new nonlinear neural adaptive generalized predictive speed control for a hot-rolling mill.
In:
Automation in Mining, Mineral and Metal Processing.
1 (1).
pp. 243-248.
(doi:10.3182/20091014-3-CL-4011.00044)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:50549)
|
|
Ge, Qi,
Sakhaei, Amir Hosein,
Lee, Howon,
Dunn, Conner K.,
Fang, Nicholas X.,
Dunn, Martin L.
(2016)
Multimaterial 4D Printing with Tailorable Shape Memory Polymers.
Scientific Reports,
6
.
Article Number 31110.
ISSN 2045-2322.
E-ISSN 2045-2322.
(doi:10.1038/srep31110)
(KAR id:78420)
|
![[img]](/78420/1.hassmallThumbnailVersion/2016_Sakhaei_ScientificReports.pdf)  Preview |
|
J
K
Kaijima, Sawako,
Sakhaei, Amir Hosein,
Lee, Tat Lin
(2017)
Multi-Material Ratchet-like Mechanism for Interlocking Joint Details.
Proceedings of IASS Annual Symposia, IASS 2017 Hamburg Symposium: Digital Technologies for Spatial Structures,
.
pp. 1-10.
ISSN 2518-6582.
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:78415)
|
|
L
Laing, Stacey,
Suriano, Raffaella,
Lamprou, Dimitrios A.,
Smith, Carol-Anne,
Dalby, Matthew J.,
Mabbott, Samuel,
Faulds, Karen,
Graham, Duncan
(2016)
Thermoresponsive Polymer Micropatterns Fabricated by Dip-Pen Nanolithography for a Highly Controllable Substrate with Potential Cellular Applications.
ACS Applied Materials & Interfaces,
8
(37).
pp. 24844-24852.
ISSN 1944-8244.
E-ISSN 1944-8252.
(doi:10.1021/acsami.6b03860)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:63484)
|
|
M
Mahfouf, Mahdi,
Chen, Min-You,
Zhang, Qian,
Linkens, Derek A.
(2006)
Adaptive weighted particle Swarm multiobjective optimisation and societal reasoning for the design o.
In: The 1st IFAC Workshop on Applications of Large Scale Industrial Systems, 30-31 August 2006, Helsinki, Finland.
(doi:10.3182/20060830-2-SF-4903.00023)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:50556)
|
|
P
Patel, Dinesh K.,
Sakhaei, Amir Hosein,
Layani, Michael,
Zhang, Biao,
Ge, Qi,
Magdassi, Shlomo
(2017)
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing.
Advanced Materials,
29
(15).
Article Number 1606000.
ISSN 0935-9648.
E-ISSN 1521-4095.
(doi:10.1002/adma.201606000)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:78417)
|
|
S
Sakhaei, Amir Hosein,
Kaijima, Sawako,
Lee, Tat Lin,
Tan, Ying Yi,
Dunn, Martin L.
(2018)
Design and investigation of a multi-material compliant ratchet-like mechanism.
Mechanism and Machine Theory,
121
.
pp. 184-197.
ISSN 0094-114X.
(doi:10.1016/j.mechmachtheory.2017.10.017)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:78414)
|
|
Shafiee, M,
Alghamdi, A,
Sansom, C,
Hart, P,
Encinas-Oropesa, A
(2020)
A Through-Life Cost Analysis Model to Support Investment Decision-Making in Concentrated Solar Power Projects.
Energies,
13
(7).
pp. 1-20.
ISSN 1996-1073.
(doi:10.3390/en13071553)
(KAR id:80627)
|
![[img]](/80627/1.hassmallThumbnailVersion/energies-13-01553.pdf)  Preview |
|
Shafiee, Mahmood,
Elusakin, Tobi,
Enjema, Evenye
(2020)
Subsea Blowout Preventer (BOP): Design, Reliability, Testing, Deployment, and Operation and Maintenance Challenges.
Journal of Loss Prevention in the Process Industries,
66
.
p. 104170.
ISSN 0950-4230.
(doi:10.1016/j.jlp.2020.104170)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:81469)
|
|
Shan, Liang,
Kong, Ming,
Bennett, Tom,
Archi, Sarroza,
Carol, Eastwick,
Sun, Duo,
Lu, Gang,
Yan, Yong,
Liu, Hao
(2018)
Studies on Combustion Behaviours of Single Biomass Particles Using a Visualization Method.
Biomass and Bioenergy,
109
.
pp. 54-60.
ISSN 0961-9534.
(doi:10.1016/j.biombioe.2017.12.008)
(KAR id:65380)
|
|
Shepherd, C.J.,
Appleby-Thomas, G.J.,
Hazell, P.J.,
Allsop, D.F.
(2009)
The dynamic behaviour of ballistic gelatin.
In: ElertFurnish MD, Anderson WW, Proud WG, M and Butler, W.T. and Furnish, M.D., eds.
AIP Conference Proceedings.
Shock Compression of Condensed Matter (2009), American Institute of Physics, Melville, New York, pp. 1399-1402. link.
1195.
pp. 1399-1402.
IOP Institute of Physics
(doi:10.1063/1.3295071)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:45125)
|
|
Shepherd, C.J.,
Appleby-Thomas, G.J.,
Wilgeroth, J.M.,
Hazell, P.J.,
Allsop, D.F.
(2011)
On the response of ballistic soap to one-dimensional shock loading.
International Journal of Impact Engineering,
38
(12).
pp. 981-988.
ISSN 0734-743X.
(doi:10.1016/j.ijimpeng.2011.07.003)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:44973)
|
|
Shepherd, C.J.,
Wilgeroth, J.M.,
Appleby-Thomas, G.J.,
Hazell, P.J.,
Allsop, D.F.
(2010)
The dynamic behaviour of ballistic soap.
In: Chmielewski, Ryszard and Kruszka, Leopold, eds.
Proceedings of the 7th International Symposium on Impact Engineering.
.
pp. 587-599.
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:45122)
|
|
Shittu, Abdulhakim Adeoye,
Mehmanparast, Ali,
Shafiee, Mahmood,
Kolios, Athanasios,
Hart, Phil,
Pilario, Karl
(2020)
Structural Reliability Assessment of Offshore Wind Turbine Support Structures Subjected to Pitting Corrosion‐Fatigue: A Damage Tolerance Modelling Approach.
Wind Energy,
23
(11).
pp. 2004-2026.
ISSN 1095-4244.
E-ISSN 1099-1824.
(doi:10.1002/we.2542)
(KAR id:83272)
|
|
W
Weeger, Oliver,
Sakhaei, Amir Hosein,
Tan, Ying Yi,
Quek, Yu Han,
Lee, Tat Lin,
Yeung, Sai-Kit,
Kaijima, Sawako,
Dunn, Martin L.
(2018)
Nonlinear Multi-Scale Modelling, Simulation and Validation of 3D Knitted Textiles.
Applied Composite Materials,
25
(4).
pp. 797-810.
ISSN 0929-189X.
E-ISSN 1573-4897.
(doi:10.1007/s10443-018-9702-4)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:78411)
|
|
X
Xu, Xu,
Banks, Stephen,
Mahfouf, Mahdi,
Zhang, Qian
(2011)
Simulations of Normal and Abnormal Grain Growth using Two-dimensional Stochastic Cellular Automata.
In: The European Congress and Exhibition on Advanced Materials and Processes, 12–15 September 2011, Montpellier, France.
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:50539)
|
|
Y
Z
Zare Oskouei, Morteza,
Mirzaei, Mohammed Amin,
Mohammadi-Ivatloo, Behnam,
Shafiee, Mahmood,
Marzband, Mousa,
Anvari-Moghaddam, Amjad
(2020)
A Hybrid Robust Stochastic Approach to Evaluate the Profit of a Multi-Energy Retailer in Tri-Layer Energy Markets.
Energy,
214
.
Article Number 118948.
ISSN 0360-5442.
(doi:10.1016/j.energy.2020.118948)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:83678)
|
|
Zare Oskouei, Morteza,
Mohammadi-Ivatloo, Behnam,
Abapour, Mehdi,
Shafiee, Mahmood,
Anvari-Moghaddam, Amjad
(2021)
Techno-Economic and Environmental Assessment of Coordinated Operation of Regional Grid-Connected Energy Hubs Considering High Penetration of Wind Power.
Journal of Cleaner Production,
280
(1).
Article Number 124275.
ISSN 0959-6526.
(doi:10.1016/j.jclepro.2020.124275)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:83339)
|
|
Zhang, Biao,
Li, Shiya,
Hingorani, Hardik,
Serjouei, Ahmad,
Larush, Liraz,
Pawar, Amol A.,
Goh, Wei Huang,
Sakhaei, Amir Hosein,
Hashimoto, Michinao,
Kowsari, Kavin,
and others.
Magdassi, Shlomo,
and
Ge, Qi
(hide)
(2018)
Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing.
Journal of Materials Chemistry B,
6
(20).
pp. 3246-3253.
ISSN 2050-750X.
(doi:10.1039/c8tb00673c)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:78413)
|
|
Zhang, Guangrui,
Mahfouf, Mahdi,
Zhang, Qian,
Gaffour, Sidahmed,
Yates, John R.,
Ayvar-Soberanis, Sabino,
Pinna, Christophe,
Panoutsos, George
(2011)
Systems-Modelling of Compact Tension Energy in High Strength Pipeline Steel.
In:
World Congress.
1 (1).
pp. 12126-12131.
(doi:10.3182/20110828-6-IT-1002.01466)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:50545)
|
|
Zhang, Qian,
Mahfouf, M.,
Panoutsos, G.,
Beamish, K.,
Liu, X.
(2015)
Multiobjective optimal design of friction stir welding considering quality and cost issues.
Science and Technology of Welding and Joining,
20
(7).
pp. 607-615.
ISSN 1362-1718.
(doi:10.1179/1362171815Y.0000000046)
(Access to this publication is currently restricted. You may be able to access a copy if URLs are provided)
(KAR id:50513)
|
|
Zhang, Qian,
Mahfouf, Mahdi,
Panoutsos, George,
Beamish, Kathryn,
Norris, Ian
(2012)
Knowledge discovery for friction stir welding via data driven approaches: Part 1 – correlation analyses of internal process variables and weld quality.
Science and Technology of Welding and Joining,
17
(8).
pp. 672-680.
ISSN 1362-1718.
(doi:10.1179/1362171812Y.0000000061)
(KAR id:50511)
|
|
Zhang, Qian,
Mahfouf, Mahdi,
Panoutsos, George,
Beamish, Kathryn,
Norris, Ian
(2012)
Knowledge discovery for friction stir welding via data driven approaches: Part 2 – multiobjective modelling using fuzzy rule based systems.
Science and Technology of Welding and Joining,
17
(8).
pp. 681-693.
ISSN 1362-1718.
(doi:10.1179/1362171812Y.0000000062)
(KAR id:50510)
|
|
Zhang, Qian,
Mahfouf, Mahdi,
Panoutsos, George,
Beamish, Kathryn,
Norris, Ian
(2012)
Systems Modelling of the Internal Process Variables for Friction Stir Welding Using Genetic Multi-objective Fuzzy Rule-Based Systems.
In: The 9th International Conference on Trends in Welding Research, 4–8 June 2012, Chicago, Illinois, USA.
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:50537)
|
|
Zhang, Qian,
Mahfouf, Mahdi,
Panoutsos, George,
Beamish, Kathryn,
Norris, Ian
(2011)
Wavelet Analysis for Assessing Friction Stir Welding Quality for Aluminium AA5083.
In: The European Congress and Exhibition on Advanced Materials and Processes, 12–15 September 2011, Montpellier, France.
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:50538)
|
|
Zhang, Qian,
Mahfouf, Mahdi,
Yates, John R.,
Pinna, Christophe,
Panoutsos, George,
Boumaiza, Soufiene,
Greene, Richard J.,
de Leon, Luis
(2011)
Modeling and Optimal Design of Machining-Induced Residual Stresses in Aluminium Alloys Using a Fast Hierarchical Multiobjective Optimization Algorithm.
Materials and Manufacturing Processes,
26
(3).
pp. 508-520.
ISSN 1042-6914.
(doi:10.1080/10426914.2010.537421)
(KAR id:50508)
|
![[img]](/50508/1.hassmallThumbnailVersion/Draft_MMP_Modelling%20and%20optimal%20design%20of%20machining%20induced%20residual%20stresses.pdf)  Preview |
|
Zhang, Qian,
Mahfouf, Mahdi,
de Leon, Luis,
Boumaiza, Soufiene,
Yates, John R.,
Pinna, Christophe,
Greene, Richard J.
(2009)
Prediction of machining induced residual stresses in aluminium alloys using a hierarchical data-driven fuzzy modelling approach.
In:
Automation in Mining, Mineral and Metal Processing.
1 (1).
pp. 231-236.
(doi:10.3182/20091014-3-CL-4011.00042)
(The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided)
(KAR id:50547)
|
|
This list was generated on Mon Jan 25 22:53:18 2021 GMT.
|