Skip to main content
Kent Academic Repository

Laboratory impacts into dry and wet sandstone with and without an overlying water layer: Implications for scaling laws and projectile survivability

Baldwin, Emily C., Milner, Daniel, Burchell, Mark J., Crawford, Ian A. (2007) Laboratory impacts into dry and wet sandstone with and without an overlying water layer: Implications for scaling laws and projectile survivability. Meteoritics & Planetary Science, 42 (11). pp. 1905-1914. ISSN 1086-9379. (doi:10.1111/j.1945-5100.2007.tb00549.x) (The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided) (KAR id:2714)

The full text of this publication is not currently available from this repository. You may be able to access a copy if URLs are provided.
Official URL:
http://dx.doi.org/10.1111/j.1945-5100.2007.tb00549...

Abstract

Scaling laws describing crater dimensions are defined in terms of projectile velocity and mass, densities of the materials involved, strength of the target, and the local gravity. Here, the additional importance of target porosity and saturation, and an overlying water layer, are considered through 15 laboratory impacts of 1 mm diameter stainless steel projectiles at 5 km s(-1) into a) an initially uncharacterized sandstone (porosity similar to 17%) and b) Coconino Sandstone (porosity similar to 23%). The higher-porosity dry sandstone allows a crater to form with a larger diameter but smaller depth than in the lower-porosity dry sandstone. Furthermore, for both porosities, a greater volume of material is excavated from a wet target than a dry target (by 27-30%). Comparison of our results with Pi-scaling (dimensionless ratios of key parameters characterizing cratering data over a range of scales) suggests that porosity is important for scaling laws given that the new data lie significantly beneath the current fit for ice and rock targets on a pi(v) versus pi(3) Plot (pi(v) gives cratering efficiency and pi(3) the influence of target strength). An overlying water layer results in a reduction of crater dimensions, with larger craters produced in the saturated targets compared to unsaturated targets. A water depth of approximately 12 times the projectile diameter is required before craters are no longer observed in the targets. Previous experimental studies have shown that this ratio varies between 10 and 20 (Gault and Sonett 1982). In our experiments similar to 25% of the original projectile mass survives the impact.

Item Type: Article
DOI/Identification number: 10.1111/j.1945-5100.2007.tb00549.x
Subjects: Q Science > Q Science (General)
Divisions: Divisions > Division of Natural Sciences > Physics and Astronomy
Depositing User: Suzanne Duffy
Date Deposited: 21 Apr 2008 08:42 UTC
Last Modified: 05 Nov 2024 09:33 UTC
Resource URI: https://kar.kent.ac.uk/id/eprint/2714 (The current URI for this page, for reference purposes)

University of Kent Author Information

  • Depositors only (login required):

Total unique views for this document in KAR since July 2020. For more details click on the image.